| Typical Mechanical Properties | ||||
|---|---|---|---|---|
| AISI # | Tensile (KSI) | Yield (KSI) | % Elongation 2" Gage | Reduction of Area |
| 75K-1045V | 90 | 75 | 14 | 25 |
| 100K – 1045/1050 | 115 | 100 | 8 | 20 |
** Tensile and Yield strength will vary with diameter of the bar
75,000 Min Yield C1045 Micro Alloyed Cold Finished Bar
100,000 Min Yield C1045/1050 Cold Drawn, Stress Relieved, A311-B
| Typical Chemical Composition | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu | Sn | Al | V |
| 0.460 | 0.870 | 0.008 | 0.026 | 0.270 | 0.090 | 0.110 | 0.029 | 0.280 | 0.009 | 0.006 | 0.093 |
| Standard Plating Specifications | |
|---|---|
| Chrome thickness: | 0.0005" minimum |
| Chrome hardness: | 68/70 Rockwell C |
| Surface finish: | 6-12 uin Ra |
| Salt Spray: | 120 hours per ASTM B-117 |
| Tolerance After Plating | |
|---|---|
| 1.00" to 2.50" Dia: | + 0.0000 / – 0.0015 |
| 2.75" to 3.00" Dia: | + 0.0000 / – 0.0020 |
| 3.25" to 4.00" Dia: | + 0.0000 / – 0.0030 |